top of page

Garden Club Tour Group

Public·380 members

HACK Mitsubishi EvoScan V2.6


Download File ===== https://blltly.com/2ty5rJ



HACK Mitsubishi EvoScan V2.6


```


HACK Mitsubishi EvoScan V2.6: How to Reflash and Tune Your Mitsubishi ECU


Mitsubishi EvoScan V2.6 is a powerful software tool that allows you to datalog, monitor, and modify your Mitsubishi ECU parameters. It supports most Mitsubishi models from 1994 to 2008, including the Lancer Evolution series.


However, if you want to take your tuning to the next level, you might want to hack Mitsubishi EvoScan V2.6 and use it to reflash and tune your Mitsubishi ECU with a Tactrix OpenPort 2.0 cable and Tephra mod.


What is Tactrix OpenPort 2.0


Tactrix OpenPort 2.0 is a USB device that connects your laptop to your car's OBD-II port. It allows you to read and write your ECU's flash memory, as well as perform diagnostics and logging.


Tactrix OpenPort 2.0 is compatible with a large number of newer Subaru and Mitsubishi vehicles, including the Lancer Evolution X. It has a 72Mhz 32-bit processor, a USB 2.0 full speed interface, and a J2534 PassThru support.


Tactrix OpenPort 2.0 works great with EvoScan v2.9, which is the latest version of the software. You can purchase it for only $20 with every cable purchase.


What is Tephra mod


Tephra mod is a custom firmware for the Lancer Evolution VIII and IX ECU that adds many features and enhancements, such as:


Launch control


Flat foot shifting


Per gear boost control


Per gear fuel compensation


Per gear ignition timing


Dual maps switching


Speed density


E85 flex fuel


Knock count display


And more...


Tephra mod is compatible with EvoScan v2.6 and above, and requires a Tactrix OpenPort 2.0 cable to flash it to your ECU.


How to hack Mitsubishi EvoScan V2.6


If you want to hack Mitsubishi EvoScan V2.6 and use it to reflash and tune your Mitsubishi ECU with Tactrix OpenPort 2.0 cable and Tephra mod, you need to follow these steps:


Download and install EvoScan v2.6 from here.


Download and install Tactrix OpenPort 2.0 drivers from here.


Download and install EcuFlash from here.


Download the latest Tephra mod ROM for your ECU from here.


Connect your Tactrix OpenPort 2.0 cable to your laptop and your car's OBD-II port.


Open EvoScan v2.6 and select OpenPort 2.0 as the interface, Mitsubishi as the protocol, and the correct baud rate for your ECU.


Click on Test Connection to make sure everything is working.


Click on Reflash ECU and select the Tephra mod ROM file you downloaded. 061ffe29dd






About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page